|MTS Metallurgical Testing Services|
|Download the PDF:
ROUND SPIGOT & FRAMELESS GLASS FENCE LOAD & IMPACT COMPLIANCE TEST (58 downloads)
|To||Sorrento Glass||Report No||MTS-18449 SG|
|1 / 7 Hector St Osborne Park WA 6017||Issue Date||25/07/2014|
|Order No.||G. Vile||Test Date||13/06/2014|
MTS Metallurgical Testing Services was engaged to perform load tests on a toughened glass pool fence panel in general accordance
with the requirements of AS 1926.1 – 2012.
|ID||Item/Heat No.||Dimensions/Type/Details||Finish||Overall Assessment|
|18449/01||Frameless Glass||1.0m Long x 1.2m High with 40mm Round
Duplex stainless steel spigots
Examinations & Tests
A visit was made to the test site to verify the installation arrangements against supplied drawings. A subsequent visit was made once the
grout had cured to conduct a load test.
The results of the tests reported herein COMPLIED with the requirements of the stated standard/s and/or specification/s.
Metallurgical Testing Manager
|40mm Square Spigot – Face view||40mm Square Spigot – Side view|
The panel was installed in accordance with this drawing, modified to suit the 100mm thick floor at the test site.
|Test Specification||AS 1926.1 – 2012, Appendix C||Test Procedure||MTS-TP3.7 Load Tests of Protective Enclosures,Barriers and Fences|
|Specimen ID||Test Load (N)||Deflection Under Load (mm)||Permanent Distortion (mm)||Observations||Assessment|
|18449/01||330||24.0||1.5||No damage, loosening or permanent distortion||COMPLIES|
The pool fence panel under test load showing the hydraulic ram and digital load indicator.
Requirements: No breakage or signs of fracture or loosening of any part. Maximum Permanent Distortion: 6mm.
MTS-18449 SG This document shall not be reproduced, except in full.
Copyright © 2010~2014 Dataprime Solutions Pty Ltd. All Rights Reserved. 119903838567